Walk-Through Metal Detectors s6

Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only)

• We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual)

•Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms ( Certification could be Potato Stamp)

• No Set Up Change is Necessary regarding Winter/Summer Seasnal Adjustments and Resistant to Vibration & Impact (Chinese Equipment my require Adjustments as per Temperature Changes)

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
• Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not Pinpointed)

• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not)
• Multi-Zone - 6 Real Detection Zones(Up/Middle/Down and Left/Right)
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked)

• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
• Five Digit Incoming Counter (Visible/Invisible)
• IR Pass Sensor ON/OFF Selection
• Four-digit changeable digital Pin Code
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Reloading the factory default settings by one-touch button
• Easy programming and monitoring with wide LCD display
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• IP 20 Protection Level (EN 60529)
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.

• Weight: 51 kg

• Gross weight: 60 kg

• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

• Power: 10W Stand By- 20W (Alarm)

• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm

• Ambient Temperature: -20°C to +70°

Walk-Through Metal Detectors sX/WP

International norms (NILECJ-0601 L1-5/IP55 WEATHERPROOF/ /EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
• IP 55 WEATHERPROOF– OUTDOOR OPERATION (EN 60529)

• Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)

• Separate Zone Sensitivity Setting Feature
• Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..

• SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object

• Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

• Detects Metals regardless their orientation
• 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs

• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

• Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels

• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen

• Special Environmental Magnetic Interference Display Menu

• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

• Adjustable Alarm Duration (Detection Speed Regardless Alarms)

• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
• IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
• Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken

• Four-digit changeable digital Pin Code and Mechanical Lock

• Automatic Failure Display Function on LCD

• Reloading the factory default settings by one-touch button

• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height

• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects

• BATTERY OPERATION where there is no Mains Supply.
• Audio-Visual alarms are noticeable at a range of 4 meters
• Micro-Processor Settings does not change when there is an electricity cut-off

• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.

• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

• SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional

• ABS Protective Footers for increased protection and strong fixing – Optional • STANDARD ABS Rain Shelter on Top

Weight : 58 kg

Gross weight: 64 kg

Operating voltage :70 VAC – 270 VAC 50Hz-60Hz

Power :10W Stand By- 20W (alarm)

Package (W x H x L):

Box 1: 645 x255 x 2290 mm Box 2: 240 x 250 x 805 mm Box 3: 600 x 150 x 850 mm

Ambient temperature: -20°C to +70° C
 electronic security equipment, hand held metal detector, metal detectors, multizone, security equipments, walk through metal detectors, security metal detectors,

Walk-Through Metal Detectors s15-İ

International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS

• Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
• Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

• Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

• Detects Metals regardless their orientation

• 10 sensitivity levels, 246 adjustable sensitivity steps at each

• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

• Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels

• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen

• Special Environmental Magnetic Interference Display Menu

• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

• IP 40-41 Protection Level (EN 60529)

• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
• Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.

• Four-digit changeable digital Pin Code

• Automatic Failure Display Function on LCD

• Reloading the factory default settings by one-touch button

• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish

• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height

• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects

• Audio-Visual alarms are noticeable at a range of 2 meters

• Micro-Processor Settings does not change when there is an electricity cut-off

• All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.

• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

• SCADA remote data communication and Networking of Multiple Metal Detectors - Send - Change settings by PC – Software Optional

• Manufactured using the latest technology components and Resistant to Vibration & Impact

•Weight: 54 kg

•Gross weight: 62 kg

•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

•Power: 10W Stand By- 20W (Alarm)

•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm

•Ambient Temperature: -20°C to +70°

electronic security equipment, hand held metal detector,
 metal detectors, multizone, security metal detectors, 
  walk through metal detectors, 

Walk-Through Metal Detectors sX-İ

Internat onal norms (VERY HIGH SENSITIVITY !... Nij 0601.02 Small
Test P ece Sens – Hand Cu key & screw dr ver samples can be
detected-EN 60529, EN 60068, EN 60950 Class1/IP 44) In conform ty
w th CE European Un on Norms and produced under ISO 9001: 2008
QMS and ECAC DOC 30 STANDARD 2 COMPLIANCE
and n compl ance with DIRECTIVE 2002/95/EC (restr ct on of the use
of certa n hazardous substances n electr cal and electron c
equ pment)
•Multi-Zone – 9 parallel zones
•Separate Zone Sens t v ty Sett ng Feature for all 9 zones.
•Standard Preset JAILHOUSE/AIRPORT/MILITARY/POLICE PREMISES,
SHOPPING MALL Secur ty Modes
•Wh lst Normal Operation, displays IN/OUT Counters and Secur ty
Level on GRAPHICAL LCD w thout abbrev at ons so that Secur ty Sta
can eas ly understand
•Capable to Detect both Ferrous and Non-Ferrous Metall c Threat
Objects Cons dered Dangerous by Internat onal Secur ty Author t es.
Can detect when tested both nd v dually and n comb nat on and
G ves Aud o-V sual Alarms. Can operate at JAILHOUSE Sens t v ty
Spectrums!..
•SMART DETECTOR – Fast and cons stent cal bration, Automat c
weapon or a recogn zed test object
•D splays the Detected Metal Objects locat on on S de Panel
from bottom to top w th Continuous LED Zone
Indicators
and/or wrapped. Impossible for such threat objects to pass through
the WTMD w thout caus ng an alarm.
•No Interferences between Zones and No False Alarms
•Homogeneous Magnet c F eld – No Dead Po nts – Same Detect on
Capab l ty from bottom to top
•Detects Metals regardless the r or entat on
•20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset
NILECJ Sens t v ty Program, 5 Preset Programs
•Automat c Frequency Select on Feature
•Metal Dens ty-Mass, S gnal Strength D splay at 10-level-VU meter
w th green, yellow, red LEDs easily allows s ght from d stance
Graph c zone d splay on Control Un t
•Auto Cal brat on (Automat cally cal brates tself up to Env ronmental
Conditions) No Set Up Changes necessary when relocated and/or
new Magnet c Objects brought Near-By
•Human Health fr endly Very Low Frequency VLF technology, No
a ects to Pace Makers, Pregnant and Magnet c Med a
•Green/Red bicolor tra c through LEDs easily allows s ght from
d stance 50 Persons/M nute and LED Alarm Indicators on s de panel
•Adjustable Random Alarm poss b l t es to g ve alarm for clean
v s tors at a selected rat o.
•Record Stat st cs of Operat on Duration, Number of V s tors and
Alarms (Real/Random Alarms Separately)
•Real time env ronmental no se Graph Bar w th s mulat on.
•Adjustable audio alarm at 10 tons/level or Soundless (Mute)
operat on
•Adjustable Alarm Durat on (Detect on Speed Regardless Alarms)
•Reloading the factory default sett ngs by one-touch button
•F ve Digit Incoming/Outgo ng &Alarm Counters (Visible/Inv s ble) –
Reset
•IR Protect on Feature enabl ng perfect low false alarm operat on/
Cont nuous Detect on Mode Select on Enabled
•Interference free Operat on from other Electron c Dev ces and Does
precaut ons have been taken
•Four-d g t changeable d g tal P n Code and Mechan cal Lock
•Automat c Fa lure D splay w th Cont nuous Self-Check ng of Key
Parameters. (BITE – Bu lt- n Test Equ pment)
•Easy Programm ng and D splay v a H gh Resolut on LCD (Liquid
Crystal D splay)
•4 Menu Languages, Standard menu n Engl sh, German, Span sh
and Turk sh
•Relay output for record ng CCTV, Photo Taken-Record ng,
controll ng turnst les, etc. on Alarms
•STANDARD Bu lt- n Un nterrupt ble Power Supply (UPS) enabling 1
hours operat on w thout ma ns
•Easy-to-mount and assemble walk through metal detector (15
M nutes) Male/Female Socket-Connector Des gn
•Manufactured for 7/24 Cont nuous Operat on
•75 cm Net Passage Width and 200 cm Net Passage He ght
•Interference free Operat on at M ddle Level Sens t v ty of 10 cm
D stance Constant Metals and 150 cm distance Mov ng Metall c
Objects
•Installat on and Operat on w thout nterference between two
detectors up to a d stance of min. 5 cm
•Battery ON/OFF Feature enabl ng Operat on W thout Ma ns
•Aud o-V sual alarms are not ceable at a range of 4 meters
•M cro-Processor Sett ngs does not change when there s an
electr c ty cut-o
•No nterference w th Storage Media, Flash Memor es, CD, D skettes
and other electron c dev ces
•Magnetic F eld ns de all passage area is 0,1 Gauss
•All Electron c Un ts (electron c un t, power supply, battery, adapter
etc..) are ns de the Equ pment. No outer un ts.
•Floor F x ng Corros on Res stant Metal Footers for proper assembly
and durable use.
•SCADA Remote Control Set - Send Rece ve- Change sett ngs by PC,
Aud o-V sual alarms can be mon tored Real T me by PC and can be
logged nto Hard D sk Software Opt onal
•REAL-TIME VIDEO PROSECUTION UNIT enabling record ng Alarmed
V s tors P ctures/All V s tors p ctures or v deo w th T me-Stamp to SD
Card ~40.000 Images Opt onal
•IRDA – Remote Control Un t (Opt onal)
•Detect on Funct ons has been tested w th ECAC/NIJ/TSA Test K ts
Product Code: 869755498114
NATO STOCK NO (NSN): 6350270411812
ECAC Compl ant A rport
and Ja lhouse Model
Techn cal Features:
•We ght: 59 kg
•Gross we ght: 68 kg

Walk-Through Metal Detectors sX

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Separate Zone Sensitivity Setting Feature
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..

SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interferences between Zones and No False Alarms

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation

20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu

Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

Adjustable Alarm Duration (Detection Speed Regardless Alarms)

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled

IP 44 Protection Level (EN 60529)

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken

Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display Function on LCD

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings does not change when there is an electricity cut-off

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional

REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 ImagesOptional


•Weight: 56 kg

•Gross weight: 64 kg

•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz ? Power: 10W Stand By- 20W (Alarm)

•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265 mm Box 2: 790 x 230 x 400 mm

•Ambient Temperature: -20°C to +70°

 METAL DETECTOR 
HAND HELD METAL DETECTOR

electronic security equipment, hand held metal detector, metal detectors, security equipments, multizone, security metal detectors, walk through metal detectors, 

Walk-Through Metal Detectors s9

International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.
Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interferences between Zones and No False Alarms
Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation
10 sensitivity levels, 246 adjustable sensitivity steps at each
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
IP 40-41 Protection Level (EN 60529)
Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken.

Four-digit changeable digital Pin Code
Automatic Failure Display Function on LCD
Reloading the factory default settings by one-touch button
Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
Audio-Visual alarms are noticeable at a range of 2 meters
Micro-Processor Settings does not change when there is an electricity cut-off
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
SCADA remote data communication and Networking of Multiple Metal Detectors - Send - Change settings by PC – Software Optional
Manufactured using the latest technology components and Resistant to Vibration & Impact

Weight: 54 kg

Gross weight: 62 kg

Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

power: 10W Stand By- 20W (Alarm)

Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm

Ambient Temperature: -20°C to +70°

metal detectors, security equipments, security metal detectors, walk through metal detectors, multizone, hand held metal detector, electronic security equipment